Point fittings

Punktkinnitused

 

 

 

 

 

 

 

 

Mounting of barrier glass( glass balustrades, balcony glass, paintings on glass etc.) can now be done easily and quick using stylish point fittings.

Below you can see the selection of point fitting we offer at our Kadaka tee 4 showroom:

Point fitting R-Point 16

KP16

Diameter of the coverhead: 16 mm

Material: Stainless steel 304

Mounting bolt: M5x40 double-end bolt / M5x40 wood bolt

Description: R-Point 16 point-fixed fittings are used for fastening background glass panes of a kitchen or other lighter glass panes on a wall. A set contains an M5x40 double-end bolt (KP16) or 5×40 wood screw (KP16P).

 Point fitting R-Point 30

KP30

Diameter of the coverhead: 30 mm

Material: Stainless steel 304

Mounting bolt: M8 / M8 with wood thread (not included, desired length bolt can be purchased)

Description: R-Point 30 is used for fastening smaller glass panes on barrier posts or other structures.

Point fitting R-Point 45

KP45Diameter of the coverhead: 45 mm

Material: Stainless steel 304

Mounting bolt: M10 / M10 with wood thread (not included, desired length bolt  can be purchased)

Description: R-Point 45 is used for fastening middle-sized and large glass panes on the balustrade and sides of a staircase (fully glazed barriers) or other structures.

 

Point fitting R-Point 60

KP60Diameter of the coverhead: 60 mm

Material: Stainless steel 304

Mounting bolt: M12 (not included, desired length bolt can be purchased)

Description: R-Point 60 is used for fastening large glass panes on the balustrade or sides of a staircase (fully glazed barrier), for fastening glasses of canopies and in other areas of high responsibility.

 

 

R-Square point fitting

R-SquareMeasure of the coverhead: 50 x 50 mm

Material: Stainless steel 304

Mounting bolt: M10 / M10 with wood thread (not included, desired length bolt can be purchased)

Description: You would like to have a glazed barrier that differs from the ordinary and something more than traditional round point fixings? If so, R-Square is just the right solution for you!
R-Square point fixings are made of stainless steel and each point fixing is manually ground and polished by professional craftsmen.

Surface finishing options:
• Brushed stainless steel
 Polished stainless steel
 Anthracite
As a special order golden, bronze, 24 K gold

Corner connection based on R-Point 30, 180ᴼ

Nurgaühendus 180kraadi

Diameter of the coverhead: 30 mm

Material: Stainless steel 304

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°.

 

Corner connection based on R-Point 30, 90ᴼ

Nurgaühendus 90kraadi

Diameter of the coverhead: 30 mm

Material: Stainless steel 304

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point countersunk point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°

Corner connection based on R-Point 30, for 90ᴼ wall

Nurgaühendus 90kraadi seinaleDiameter of the coverhead: 30 mm

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point countersunk point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°.

 

Corner connection based on R-Point 45, 180ᴼ

Nurgaühendus 45mm 90kraadi seinaleDiameter of the coverhead: 45 mm

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point countersunk point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°.

 

Corner connection based on R-Point 45, 90ᴼ

Nurgaühendus 45mm 90 kraadi seinale

Diameter of the coverhead: 45 mm

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point countersunk point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°

Corner connection based on R-Point 45, for 90ᴼ wall

Nurgaühendus 45mm 90kraadi   seinale

Diameter of the coverhead: 45 mm

Description: Corner connections allow aesthetic and safe connection of two glasses or a glass to a wall. To do this two R-Point countersunk point fixings are connected to each other with a brushed stainless steel plate that is located at an angle of 45°, 90° or 180°.

Point fitting RG-170

RG-170 861501Diameter of the coverhead: 35 mm

Material: Stainless steel 304

Description: A point fixing capable for 60 kg/pc. Used with whiteboard, glass balustrade, decorative glass etc. They are adjustable between 15-20mm ( product code 861501) and 30-35mm (product code 861502). Diameter of the bore is 26 mm. Suitable for glass thickness of 8- 15 mm.

Point fitting RG-170 technical drawing 

 

Countersunk point fitting RG-173

RG-173Diameter of the coverhead: 32 mm

Material: Stainless steel 304

Description: A point fixing capable for 60 kg/pc. Used with whiteboard, glass balustrade, decorative glass etc. They are adjustable between 15-20mm ( product code 861504) and 30-35mm ( product code 861505). Diameter of the bore is 26 mm. Suitable for glass thickness of 8- 15 mm.

Point fitting RG-173 technical drawing

Point fitting RG-176

RG-176Diameter of the coverhead: 50 mm

Material: Stainless steel 304

Description: A point fixing capable for 90 kg/pc. Used with whiteboard, glass balustrade, heavy decorative glass etc. They are adjustable between 20-25mm (product code 861507) and 40-45mm (product code 861508). Diameter of the bore is 32mm. Suitable for glass thickness of 10- 15 mm.

Point fitting RG-176 technical drawing

Point fitting RG-124

RG-124Diameter of the coverhead: 35 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. Point fixing has two variable parts and also diffrent lengths. Suitable for glass thickness of 8-13 mm. Diameter of the bore is 26 mm.

Point fitting RG-124 technical drawing

Countersunk point fitting RG-125

RG-125Diameter of the coverhead: 32 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixing has two adjustable parts, and length of the rod varies between the models. Suitable for glass thickness of 8-13 mm.

Point fitting RG-125 technical drawing

Point fitting RG-126

RG-126Diameter of the coverhead: 35 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixing has two adjustable parts, and length of the rod varies between the models. Suitable for glass thickness of 8-13 mm. Diameter of the bore is 26 mm.

Point fitting RG-126 technical drawing

Countersunk point fitting RG-127

rg-127Diameter of the coverhead: 32 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixing has two adjustable parts, and length of the rod varies between the models. Suitable for glass thickness of 8-13 mm.

Point fitting RG-127 technical drawing

Countersunk point fitting RG-128

rg-128Diameter of the coverhead: 32 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. Point fixing has one variable part. Suitable for glass thickness of 8-13 mm.

Point fitting RG-128 technical drawing

Point fitting RG-129

rg-129Diameter of the coverhead: 35 mm

Material: Stainless steel  304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. Point fixing has one variable part. Suitable for glass thickness of 8-13 mm. Diameter of the bore is 26 mm.

Point fitting RG-129 technical drawing

Point fitting glass-glass-glass RG-130

rg-130Diameter of the coverhead: 35 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixing has four adjustable parts and the length of the rod varies. Suitable for glass thickness of 8-13 mm. Diameter of the bore is 26 mm.

Point fitting RG-130 technical drawing

Countersunk point fitting glass-glass-glass RG-131

rg-131Diameter of the coverhead: 32 mm

Material: Stainless steel 304

Description: A point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixings has four adjustable parts and the length of the rod varies. Suitable for glass thickness of 8-13 mm.

Point fitting RG-131 technical drawing

 Point fitting wall-glass-wall RG-132

rg-132Diameter of the coverhead: 35 mm

Material: Stainless steel 304

Description:  point fixing for display cases, glass balustrades, glass walls, decorative glass etc. The point fixings has four adjustable parts and the length of the rod varies. Suitable for glass thickness of 8-13 mm. Diameter of the bore is 26 mm.

Point fitting RG-132 technical drawing